Easy Angel Crafts: Paper Star Angel
The Easy Angel Crafts Paper Star Angel Ornament requires just a few simple, inexpensive materials and
around-the-house tools to make with our easy instructions. You can easily make several of these Easy Angel
Crafts Paper Star Angel ornaments with very little expense or time. Take a look.
Let's look at the materials and the steps for how to make the paper star angel ornament:
Easy Angel Crafts: Paper Star Angel Ornament Materials and Tools:
- Two pieces of 8 1/2 by 11-inch paper
- One piece of curling ribbon 1/4 to 1/8 inch wide by 10 inches long
- One piece of curling ribbon 1/4 to 1/8 inch wide by 20 inches long
- Chenille wire
- Wooden "doll head" 3/4 inch in diameter
- Pin (optional - can use tip of scissors instead)
- The two pages of the Easy Angel Crafts
Paper Star Angel Ornament pattern
The Steps for How to Make the Easy Angel Crafts: Paper Star Angel Ornament:
Print both pages of the Easy Angel Crafts Paper Star
Angel Ornament pattern page. It makes it easier if you can print the pattern on the paper you plan to use
for the project. Regular 8 1/2 x 11-inch printer paper (20-pound) works just fine but 24-pound is better. It has
Copy the five star patterns and the one set of wings pattern to the paper for the
Easy Angel Crafts Paper Star Angel ornament.
Cut around the outer edges of each shape.
Fold each star shape along the straight lines. The folds should cross at the center of the
Turn the star over such that the marked lines are on the bottom. Reverse the folds to
form the star.
Fold each of the five stars the same way. Fold the wings shape across the small
Use a pin or the tip of the scissors to make a small hole in the center of each star. The hole
should be just large enough for the wire inside the chenille to pass through. The hole should be small
enough for the stars to not slide easily on the chenille wrapping the wire. The chenille
should hold the stars apart.
The wings fit across one of the folds in the small star. Position the wings on the
star to see where the glue should be placed.
Apply the glue and press the wings to the small star until the glue holds.
Make a loop in one end of the chenille wire. This will be under the bottom of the
largest star. The loop will prevent you from inadvertently pushing the bottom star off the chenille
Stage the pieces of the Easy Angel Crafts Paper Star Angel ornament. The wooden doll head is
at the top and each of the stars increase in size with the largest at the bottom.
Starting underneath the largest star, push the chenille wire through the small center hole in
each of the stars then through the hole in the wooden doll head. Space the paper stars from 1
1/4 to 1 1/2 inches apart as you add them to the chenille wire.
Form a loop in the chenille wire above the wooden doll head for the Easy Angel Crafts
Paper Star Angel ornament's halo.
Cut the two pieces of ribbon, one 10 inches and one 20 inches long. This Easy Angel Crafts
Paper Star Angel ornament used golden curling ribbon.
Fold the shorter ribbon in half. Tie a knot in the ends to form a loop.
Thread the longer ribbon through the loop behind the wooden doll head. Bring the ribbon ends
around chenille wire at the neck of the Easy Angel Crafts Paper Star Angel ornament. Make sure the ends are
even before tying a simple knot in the ribbon below the paper star angel's chin.
Curl the ribbon and hang the simple yet pretty Easy Angel Crafts Paper Star Angel
In our examples of the Easy Angel Crafts Paper Star Angel ornament, we have a white robed angel with white
chenille wire and white curling ribbon. On the right is a blue robed angel with a blue chenille wire and white
Mixing and matching several colors of paper, chenille wires and ribbons would make a variety of these pretty
paper star angels.
This would be a fun project for children (and adults too) to color before constructing the pretty Easy Angel
Crafts Paper Star Angel ornaments.